Why does macrotech require to reserve gaps when installing composite decking?

　　Composite decking is widely used in our lives, so what are the steps for the installation of the floor? And why should the plastic wood floor leave gaps during installation?

      1.Under normal circumstances, the joist needs a span of 30-50 cm (depending on the size of the profile) when the plastic-wood profile is installed.

　　2. Self-powered screws are durable and are the first choice for equipment plastic-wood profiles.

　　3. When using special screws in equipment, it is necessary to drill holes in advance. The diameter of the pre-drilled hole should be less than 3/4 of the diameter of the straight nail or screw.

　　4. When the width of the profile is greater than 10mm, each end should be fixed with two screws.

　　Shorter distances may be required for equipment in exceptional operating environments or under extreme loading conditions, such as hot tubs.

　　macrotech adheres to the product concept of "focusing on quality and consistency", only produces high-quality plastic wood products, and truly realizes large-scale, high-quality, and stable continuous supply - let macrotech quality, from the first board to the last board Consistently.