Why are more and more people choosing to use wpc decking?

　　Wpc decking is a new type of composite floor in today's society. Its main materials are polychlorinated and wood-plastic wood powder, and wood fiber powder, and are molded at high temperatures. Wpc decking surpasses preservative wood both in appearance and in reality. The size of wpc decking can be customized arbitrarily, while the preservative wood has only a specified length. In the long run, the cost of wpc decking is lower than that of preservative wood. The temperature in Northeast China will drop to minus 20-30 degrees Celsius in winter. What material is used for wpc decking at such a low temperature to explain the durability and not affect it? The best choice at this time is nothing more than wpc decking. Wpc decking is a new type of environmentally friendly wood-plastic composite material. The wood phenol produced during the production of medium and high-density fiberboard is added with recycled plastics through granulation equipment to make wood-plastic composite materials and then extruded into the production group. into wpc decking. The main materials of wpc decking are PE and wood powder or bamboo powder. After adding additives and mixing at high speed, it is carried out.

　　Use self-drilling and self-tapping screws for plastic wood and steel plates. When using self-tapping screws to fasten between WPC and WPC, lead holes should be drilled first, that is, pre-drilled holes. The diameter of the pre-drilled hole should be less than 3/4 of the screw diameter. When installing wpc decking, one screw should be used on the left and right between the wood-plastic profile and each keel. The junction points of wpc decking and keel are connected and fixed with plastic buckles. Regarding the installation of wpc decking, under normal circumstances, the joist requires a span of 30-50 cm (depending on the size of the profile) when installing the wood-plastic profile.

　　The low carbon and environmental protection characteristics of wood-plastic composite materials are remarkable. Data shows that using 1 ton of wood-plastic composite materials is equivalent to reducing carbon dioxide emissions by 1.82 tons, reducing deforestation by 1 cubic meter, saving 80 barrels of crude oil, and saving 11 tons of standard coal. Wood-plastic composite material is an imported product that entered in the 1990s. In some developed countries abroad, the wood-plastic industry has gone through 3 stages of development: mainly producing ordinary logistics transportation pallets - mainly producing landscape building profiles - mainly producing heavy structural components, and building intensive complete sets of buildings, the product application prospect is broad. In my country, at present, the production of these three stages of development coexists.

　　Wpc decking is a new type of scientific and technological product, which meets people's requirements for resource reuse and health and environmental protection. In terms of its environmental protection, it has now replaced the widely popular wpc decking and has become the new master of wpc decking.