Wood and plastic manufacturer Macrotech directed the installation of wood Decking

　　With the increasing awareness of environmental protection, Wood Decking has been widely used. Then how to install wood Decking, macrotech technicians to introduce you.

　　1, fixed wood plastic keel

　　Lay the wood-plastic keel evenly on the concrete floor. It is recommended that the spacing of each keel be 30cm. Use an electric drill to guide holes on the keel, the diameter of the hole can not be less than the diameter of the screw, and then screw the screw into the drilled hole, the keel is fixed on the cement floor, the nail head should be all screwed into the keel, not exposed, or it may lead to uneven floor surface.

　　2. Secure the first wood Decking

　　Each wood Decking has Yin and Yang grooves on the left and right sides. When the shop installs the first floor, can use woodworking tool the Yang slot of outside of the first floor cent saw off or grind go, the surface that is in the floor next uses electric drill lead hole, open screw enter nail, fix its go up in keel.

　　3. Secure the second wood Decking

　　The second Wood Decking male groove is stuck to the female groove of the first floor, then the electric drill is drilled into the male groove side surface of the second floor, and screws are screwed to fix it to the keel. The spacing of screws can be controlled by the construction personnel during the installation process, so as not to be too dense to ensure firm. The latter wood Decking installation, like the previous one, needs no further explanation.

　　Macrotech was founded in 2016, specializing in the production and construction of injection wood products, is a professional plastic wood company integrating research and development, production and sales. Its products cover: plastic wood co-extrusion floor, plastic wood profiles, plastic wood landscape and plastic wood DIY four series of products, and has 27 independent production lines, with annual output of 20000 tons of production capacity. If you have any purchase requirements, please feel free to contact us.