Points of attention for installation of WPC fencing

　　Macrotech WPC Fencing is a special material that imitates wood and surpasses wood in performance. It can be seen in parks, greenways, courtyards, terraces and balconies. Its main characteristics are mildew and corrosion proof, stable performance, no fading and no deformation, and it is accepted and liked by citizens with its unique characteristics. There are some points to pay attention to when installing WPC fencing. Next, Macrotech professionals will explain it to you.

     1.When fixing the wood-plastic column, it is generally not recommended to directly embedded in the concrete. The galvanized square pipe slightly less than the diameter of the wood-plastic column of 1-2 mm can be welded into an inverted T shape with the steel plate, and then fixed on the concrete ground with the expansion bolt; Then the wood plastic column is set into; In addition, at the waist of the wood-plastic column, the drilling screw can be rotated to penetrate the lined steel pipe to ensure stability; The spacing between the conventional wood-plastic columns (the span of the guardrail) is about 1.5 meters, and should not exceed 2 meters as far as possible, so as not to cause safety risks due to excessive shaking of the span.

　　2. When the armrest is sheathed with the injection molding connection piece, the extended batch head should be used to avoid the injury or damage of the injection molding piece when the bit rotates during the installation of the connection piece; The distance between wood plastic armrest, control generally in 0.8 meters or so.

　　3. When connecting the small square column with the injection molding inner connectors, it must be ensured that the wood-plastic small square column is on the horizontal straight line, otherwise it will affect the overall beauty of WPC Fencing. The spacing of the wood-plastic small square column is generally controlled within 0.2 meters.

　　4, any wood plastic profiles do connection, must be reserved for 2 mm gap, as a material in case of thermal expansion or cold contraction.

　　These precautions can only be avoided if we understand them. If we do not pay attention to these problems, the consequences will be more serious. It is recommended to find a professional construction after-sales team to install and operate.

　　Macrotech focuses on four series of products: WPC co-extruded flooring, WPC profile, WPC landscape and WPC DIY. It is a professional WPC company integrating research and development, production and sales. It has 27 independent production lines with an annual output of 20,000 tons, which can bear all kinds of large-scale projects.

　　Macrotech company adhere to the product concept of "focus on quality, consistent", only do high quality wood plastic products, and achieve continuous and stable supply -- from the first board to the last board is consistent.